Name: Sanitary negative pressure pump
Specifications:
1.Spec: 3T-180T, 0.75KW-75KW
2.Material: SUS304 SUS316L (the pump body, pump cover, impellerwhich is contact with Medium material, made of stainless steel SUS316L and SUSI304
3.Standard: DIN, SMS
4.Impeller: Open type impeller, semi-close type impeller
5.Surface treatment: The parts contacted with medium is polished
6.Working condition: Sanitary centrifugal pumps is a high and low level transmission, as well as the
Level transmission, and has a amount of suction.
7.The max pressure of inlet: 0.5MPa
8.Temperature range: -10° C to +140° C(EPDM)
9.Water pressure: Max 0.1MPa
10.Flow rate: 0.25-0.5L/min
11.Application: Belong to a turbine the diversion centrifugal pump can extract the liqiud of the vacuum
Tank under the pressure of negative pressure 0.09MPa.
Motor:
I. Configuration of "ABB" brand three-phase AC motor is in accordance with the International
UnRegisteredElectrotechnical CommissionIEC60034. IEC60072 standard design comply with
European "CE" marking requirements
II. The explosion-proof motor also available, that can meet with the requirement of different
Applications.
III. It with excellent electric performance, and with low niose, low vibration, the protection grade is
IP55, insulation grade is F.
IIII. Operate involtage:
≤ 3Kw, 220-240V/380-420V, /Y
>3Kw, 380-420V/660-690V, /Y
IV. Requency: 50Hz/60Hz
V. Working method: Continuous(SI)
VI. Rotate speed: The standard rotate speed is 2900r/min
| Spec |
3T - 180T, 0.55KW - 75KW |
| Voltage |
≤3KW, 220-240/380-420V, Δ/Y; >3KW, 380-420/660-690V, Δ/Y |
| Frequency |
50Hz/60Hz |
| Lift |
9 - 60m |
| Inlet/outlet |
25 - 102mm or 1"-4" |
Audited Supplier 
){kind=link}
){kind=link}